Advanced (Playback)90VQT1J82• DPOF settings on the original picture datawill not be copied. Set the DPOF settingsagain after copying is finished. (P83)• When copying clipboard pictures onto acard, select [COPY] on the clipboardplayback menu. (P67)Press [ ] to display the [PLAY] modemenu and select the item to set. (P74)Usually, it is not necessary to format thebuilt-in memory and the card.Format them when the message[BUILT-IN MEMORY ERROR] or[MEMORY CARD ERROR] appears.Press 3 to select [YES] and thenpress [MENU/SET].(The illustration shows the screen whenthe built-in memory is formatted.)• When a card is not inserted, you canformat the built-in memory. When a cardis inserted, you can format the card.• If you press [MENU/SET] whileformatting the built-in memory, theformatting will stop halfway. (However,all the pictures will be deleted.)• Formatting irretrievably deletes all thedata including clipboard pictures andprotected pictures. Check the datacarefully before formatting.• If the card has been formatted on a PC orother equipment, format it on the cameraagain.• Use a battery with sufficient battery poweror the AC adaptor (DMW-AC5PP;optional) when formatting.• Do not turn the camera off duringformatting.• It may take longer to format the built-inmemory than the card. (Max. about 15 sec.)• You cannot format an SD Memory Card oran SDHC Memory Card when the card’sWrite- Protect switch A is set to [LOCK].• If the built-in memory or the card cannotbe formatted, consult your nearestService Center.[FORMAT]Initializing the built-in memory or acard/SETMENU/SETMENU2For USA assistance, please call: 1-800-272-7033or send e-mail to : digitalstillcam@us.panasonic.comFor Canadian assistance, please call:1-800-99-LUMIX (1-800-995-8649) orsend e-mail to: lumixconcierge@ca.panasonic.com