Panasonic Lumix DMC-FX33 Operating Instructions Manual

Also see for DMC-FX33A - Lumix 8.1MP Digital Camera: Instrucciones básicas de funcionamiento

Contents

Connecting to other equipment97VQT1J82[PAGE LAYOUT] to [ ] and then set[NUM. OF PRINTS] to 4 for the picturethat you want to print.• When printing different pictures on1 sheet of paperFor example, if you want to print 4 differentpictures on 1 sheet of paper, set[PAGE LAYOUT] to [ ] and then set[COUNT] in [DPOF PRINT] (P83) to 1 foreach of the 4 pictures.• Do not disconnect the USB connectioncable when the cable disconnectionwarning icon [ ] is displayed.(Depending on the printer, the icon maynot be displayed.)• If the remaining battery power becomeslow while the camera and the printer areconnected, the status indicator blinks andthe alarm beeps. If this happens duringprinting, press [MENU/SET] and stopprinting at once. If not printing, disconnectthe USB connection cable.• The camera is receiving an error messagefrom the printer when the [¥] indicationlights orange during printing. Afterfinishing printing, make sure there are noproblems with the printer.• If the total number of DPOF prints or thenumber of DPOF pictures printed is high,pictures may be printed several times. Theremaining number of prints indicated maydiffer from the number set. This is not amalfunction.• With date printing, the setting on theprinter may take priority over the settingon the camera. Check the date printsetting on the printer also.• The message [USB MODE CHANGED.PLEASE REMOVE THE USB CABLE.]appears if you change the mode dial to amode other than [ ] while the cameraand the printer are connected. Set themode dial to [ ] again and thendisconnect the USB connection cable. Ifthis happens during printing, stop printingand then disconnect the USB connectioncable.Playing Back Pictureson a TV Screen∫ Playing back pictures using the AVcable (supplied)• Set the [TV ASPECT].• Turn this unit and the TV off.1 Connect the AV cable A(supplied) to the [AV OUT] socketon the camera.• Connect the AV cable with the [ ]mark facing the [2] mark on the[AV OUT] socket.• Hold the AV cable at B and insertstraight in or take straight out.2 Connect the AV cable to the videoinput and the audio input socketson the TV.• 1 Yellow:to the video input socket• 2 White:to the audio input socket3 Turn the TV on and select externalinput.4 Turn the camera on.DIGITALAV OUTDC IN