№SR-ZSV00039 - 11 -Motor Business Unit, Appliances Company, Panasonic Corporation3-2 7 segment LEDAt power-up after displaying the check pattern, perform the following normal display.If you operate the front RSW will show the real-time stiffness value of RSW after adjustment for the front.However, when an alarm occurs when an alert will display a warning code, the alarm code (main + sub)。Control power ONAll displayDot displayServo-on command Servo-off command(riht dot:main power OK)(left dot:motor electrified)Alarm occur Alarm clearServo-off state[--]< Alarm>The main code and sub-code(+left dot) of alarmcode(algorism) display alternantly.(For example:overload)Main code Sub-code(+left dot)Warning occur latch:settle problem+alarm clearNo latch:settle problem< Warning >Warning code(hex) and normal state displayalternantly. Left dot flash while warning occur.(For example:overload)Warning code(about 2s)Left dot flashNormal(about 4s)[88] displayPanel RSWoperateRSW=0confirm(2s)RSW except 0confirm(2s)Panel RSWoperateRSW operatingRSW confirm<Normal >Panel RSW priority indicate (RSW≠0)Servo on/off state is displayed by character。Set the stiffness by using computer(PANATERM).LED displays a real-time stiffness inalgorism after adjustment for theRSW. It can not be set by computer.Servo-on state[Pc]Priority display of PANATERM and panel RSW is decided by the vaule of RSW.The display of right dot means main power OK. The diplay of left dot means motor electrified.Decimal indicate:(right dot:main power OK)<PANATERM priority indicate(RSW=0)>