Chapter 4 Settings — [PROJECTOR SETUP] menuENGLISH - 113[COMMAND] Detailed settings of[COMMAND] Description[INPUT][COMPUTER1] Switches the input to COMPUTER1.[COMPUTER2] *1 Switches the input to COMPUTER2.[VIDEO] Switches the input to VIDEO.[DVI-D] Switches the input to DVI-D.[HDMI1] Switches the input to HDMI1.[HDMI2] Switches the input to HDMI2.[DIGITAL LINK] Switches the input to DIGITAL LINK.[INPUT1] - [INPUT10] *2 Switches the input to DIGITAL LINK, and switches the input of thePanasonic twisted-pair-cable transmitter to the specified input.[OPERATING MODE][NORMAL] Prioritizes luminance.[ECO] Controls the power to increase the life of the light source althoughthe luminance is lower than that of [NORMAL].[SILENT] Prioritizes the operation with less noise although the luminance islower than that of [NORMAL].[LONG LIFE1] Controls the power to increase the life of the light source althoughthe luminance is lower than that of [ECO].[LONG LIFE2] Controls the power to increase the life of the light source althoughthe luminance is even lower than that of [LONG LIFE1].[LONG LIFE3]Controls the power to increase the life of the light source to themaximum although the luminance is even lower than that of [LONGLIFE2].[USER1] Controls the power with the setting set in [USER1].[USER2] Controls the power with the setting set in [USER2].[USER3] Controls the power with the setting set in [USER3].[P IN P][OFF] P IN P function is not used.[USER1] Places the sub screen with the setting set in [USER1].[USER2] Places the sub screen with the setting set in [USER2].[USER3] Places the sub screen with the setting set in [USER3].[IN STANDBY MODE(AUDIO)] [OFF] Stops the audio output during standby.[ON] Outputs the audio during standby.[VOLUME] [0] - [63] Sets the volume.*1 The [COMPUTER2] command is disabled when the [DISPLAY OPTION] menu → [COMPUTER IN/OUT] → [COMPUTER2 SELECT] is set to[COMPUTER1 OUT].*2 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its inputname is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.11) Press the button.f The command is fixed and n is displayed at the left of the selected command.f After the command is fixed, press the 12) Press asqw to select [STORE], and press the button.Notef To delete a command that has been already set, press the button on the remote control while the screen in Step 5) isdisplayed, or select [DELETE] at the screen in Step 6) and press the button.f If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest commandnumber.f The operating time will be the local time. (x page 118)f If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in[SCHEDULE] is executed, the command set with the schedule function may not be executed.[INITIAL STARTUP]Set the startup method when the switch is set to .1) Press as to select [INITIAL STARTUP].2) Press qw to switch the item.f The items will switch each time you press the button.[LAST MEMORY] Starts up the projector in the condition before the switch is set to .[STANDBY] Starts up the projector in standby.[ON] Starts projecting immediately.