Panasonic PT-RZ575 Operating Instruction

Contents

Chapter 5 Operations — Network connection136 - ENGLISHNetwork connectionThe projector is equipped with the network function, and following is possible by connecting to a computer.f Web controlSetting, adjustment, and displaying status of the projector are possible by accessing the projector from acomputer.Refer to “Web control function” (x page 139) for details.f Multi Monitoring & Control Software“Multi Monitoring & Control Software”, which is a software application to monitor and control multiple displaydevices (projector or flat panel display) connected via LAN, can be used.Refer to the Operating Instructions of the “Multi Monitoring & Control Software” in the supplied CD-ROM fordetails.f Early Warning Software“Early Warning Software”, which is a software application to monitor the status of the display devices (projectoror flat panel display) or the peripheral device within the intranet, and to notify the problem or to detect the sign ofpossible problem of the device, can be used.Visit the Panasonic website (http://panasonic.net/avc/projector/pass/) for details.f PJLinkOperation or status query of the projector can be performed from a computer using the PJLink protocol.Refer to “PJLink protocol” (x page 164) for details.f Art-NetSetting of the projector can be operated by the DMX controller or application software using the Art-Net protocol.Refer to “Using Art-Net function” (x page 165) for details.f Command controlOperation or status query of the projector can be performed from a computer using the control command.Refer to “Control commands via LAN” (x page 169) for details.Connecting to the networkThe projector can be connected to the network using the terminal or the terminal.The Ethernet signal from a twisted-pair-cable transmitter can be received in the terminaltogether with the video, audio, and serial control signal via a LAN cable.f Use either of the terminal or the terminal when a twisted-pair-cable transmitter isnot used.f To connect a twisted-pair-cable transmitter that is not supporting send/receive of the Ethernet signal, use the terminal.f To send/receive the Ethernet signal via a twisted-pair-cable transmitter, use the terminal.Example of a normal network connectionComputerProjectorLAN cable (straight) LAN cable (straight)HubAttentionf When a LAN cable is directly connected to the projector, the network connection must be made indoors.Notef A LAN cable is required to use the network function.