Chapter 4 Settings — [DISPLAY OPTION] menu90 - ENGLISH4) Press the button.f The [DVI-D] screen is displayed.5) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes the EDID data according to the [SCREEN FORMAT] setting.[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.f Proceed to Step 10) when [DEFAULT] or [SCREEN FIT] is selected.6) Press the button.f The [RESOLUTION] screen is displayed.7) Press asqw to select [RESOLUTION].f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].8) Press the button.f The [VERTICAL SCAN FREQUENCY] screen is displayed.9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].g [1920x1080p], [1920x1080i]10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef Settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in the [DVI-D IN] screen.f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.f The computer, video device, or projector in use may require the power to be turned off and on again after setting.f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.[HDMI IN]Set this item in accordance with the video signal input to the terminal or the terminal.Setting [SIGNAL LEVEL] in [HDMI IN]1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press as to select [SIGNAL LEVEL] of [HDMI1] or [HDMI2].4) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-ray disc player) is input to the terminal or the terminal.[0-1023]Select this item when the signal output from the DVI-D terminal of the external device (such as acomputer) is input to the terminal or the terminal using a conversion cable,etc.Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the terminal or the terminal.
