Chapter 3Basic Operations—ProjectingENGLISH - 51Switching the input by displaying the input selection screenThe input for projection can be selected by displaying the input selection screen using the button on the control panel.1)Press the button on the control panel.fThe input selection screen is displayed.INPUT SELECTCOMPUTER1COMPUTER2VIDEODVI-DHDMI1HDMI2DIGITAL LINKSELECTSETENTER2)Pressasto select the input for projection, and press the button.NotefThe input can also be switched by pressing the button while the input selection screen is displayed.The input will switch each time you press the button.fIf the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, the inputselection menu for the DIGITAL LINK output supported device is displayed when the button is pressed while the DIGITAL LINKinput is selected in the input selection screen.fIf the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, the DIGITALLINK logo and the input name selected in the DIGITAL LINK output supported device are displayed in the display section of the [DIGITALLINK] in the input selection screen.Adjusting the imageAdjust the projection angle, focus, and shift if the projected image or the position is not correct while the positionof the projector and the screen is correctly set up.1)Adjust the projection angle.fInstall the projector on a flat surface so that the front of the projector is parallel to the screen surface,making the projected image rectangular.fIf the projector is tilted downward than the screen, extend the adjustable feet so that the projected imagebecomes rectangular.Refer to “Adjusting adjustable feet” (xpage33) for details.2)Adjust the focus and the lens position.fFor details, refer to “Adjusting the focus and the shift” (xpage51).NotefPerform the [POSITION] menu→[SCREEN ADJUSTMENT] when the projected image is distorted.fThe projector is not equipped with the zoom adjustment function. Adjust the size of the projected image with the position of the projector andthe screen (projection distance).Adjusting the focus and the shiftUsing the control panel1)Press the button on the control panel.fThe scree will switch between the adjustment screens of [FOCUS] and [SHIFT] every time the button ispressed.2)Select each adjustment item and pressasqwto adjust.