|
Chapter 3 Basic Operations — Operating with the remote controlENGLISH - 57Notef To adjust [KEYSTONE] or [CURVED CORRECTION], press as to select the item to adjust, and press qw to adjust the item.f To adjust [CORNER CORRECTION], press as to select the item to adjust. Individual adjustment screen is displayed by pressing the button. Adjust the item using asqw.f Only one of the [KEYSTONE], [CORNER CORRECTION], or [CURVED CORRECTION] setting is enabled.f Refer to the [POSITION] menu → [SCREEN ADJUSTMENT] (x page 74) for details.Switching the image aspect ratioSwitch the image aspect ratio according to the input.button1) Press the button.f The setting will change each time you press the button.Notef Refer to the [POSITION] menu → [ASPECT] (x page 72) for details.Using the P IN P functionLocate a separate, small sub screen in the main screen to project two images simultaneously.button1) Press the button. f The setting will change each time you press the button.Notef Refer to “[P IN P] menu” (x page 121) for details.Using the function buttonBy assigning the following functions to the button, it can be used as a simplified shortcut button.[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], [WAVEFORM MONITOR]button1) Press the button.Notef Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 115).Displaying internal test patternThe projector has eight types of internal test patterns to check the condition of the projector body. To display testpatterns, perform the following steps.button1) Press the button.2) Press qw to select the test pattern.Notef Test patterns can also be displayed using the menu operation. Refer to “[TEST PATTERN] menu” (x page 123) for details.f Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performingvarious adjustments. PreviousNext |