Chapter 4 Settings — [ADVANCED MENU] menuENGLISH - 77[ADVANCED MENU] menuOn the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 61) for the operation of the menu screen.[DIGITAL CINEMA REALITY]The picture quality is enhanced by raising the vertical resolution higher by performing the cinema processingwhen 576/50i signal for PAL (or SECAM), 480/60i signal for NTSC, or 1080/50i or 1080/60i signal is input.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically detects the signal and performs the cinema processing. (Factory default setting)[OFF] Does not perform cinema processing.[30p FIXED] When 480/60i or 1080/60isignal is input Performs forced cinema processing (2:2 pulldown).[25p FIXED] When 576/50i or 1080/50isignal is inputNotef In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30pFIXED]. (Vertical resolution will degrade.)f When the [ADVANCED MENU] menu → [FRAME RESPONSE] is set to [FAST], [DIGITAL CINEMA REALITY] cannot be set.[BLANKING]You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running outfrom the screen while an image from the VCR or other devices are projected.1) Press as to select [BLANKING].2) Press the button.f The [BLANKING] adjustment screen is displayed.3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].4) Press qw to adjust the blanking width.Blanking correction Item Operation Adjustment Range of adjustmentTop of the screen [UPPER]Press q. The blanking zonemoves upward.Top and bottom 0 - 599Press w. The blanking zonemoves downward.Bottom of thescreen [LOWER]Press w. The blanking zonemoves upward.Press q. The blanking zonemoves downward.