Chapter 4 Settings — [DISPLAY OPTION] menu96 - ENGLISHNotef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[NONE] Disables the startup logo display.Notef When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.f If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] is set to [ON], the startup logo is not displayed whenprojection starts before the specified time elapses after the projector enters the standby mode.The specified time is a time set in the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] → [VALID PERIOD].[UNIFORMITY]Correct the brightness and color unevenness of the entire screen.Setting each color1) Press as to select [UNIFORMITY].2) Press the button.f The [UNIFORMITY] screen is displayed.3) Press as to select [WHITE], [RED], [GREEN], or [BLUE].4) Press qw to adjust the level.Item Operation Adjustment Range of adjustment[VERTICAL]Press w.The lower-side color becomespale, or the upper-side colorbecomes dark.- 127 - +127Press q.The upper-side color becomespale, or the lower-side colorbecomes dark.[HORIZONTAL]Press w.The left-side color becomes pale,or the right-side color becomesdark.Press q.The right-side color becomespale, or the left-side colorbecomes dark.Setting [PC CORRECTION]Set the [PC CORRECTION] function to correct the brightness and the color unevenness of the entire screen usinga computer.To use the [PC CORRECTION] function, an optional software application is required. Consult your dealer.1) Press as to select [UNIFORMITY].2) Press the button.f The [UNIFORMITY] screen is displayed.3) Press as to select [PC CORRECTION].4) Press qw to switch the item.