Panasonic PT-VW431DU Operating Instructions Manual

Also see for PT-VW431DU: Specifications

Contents

2 - ENGLISHImportantInformationRead this first!WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCTTO RAIN OR MOISTURE.Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used forpower supplies up to 125 V, 10 A. If you need to use higher voltages or currents than this, you willneed to obtain a separate 250 V power cord. If you use the accessory cord in such situations, firemay result.WARNING: RISK OF ELECTRIC SHOCK, DO NOT OPEN.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert theuser to the presence of uninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance (servicing) instructions in the literature accompanying theproduct.CAUTION: This equipment is equipped with a three-pin grounding-type powerplug. Do not remove the grounding pin on the power plug. This plugwill only fit a grounding-type power outlet. This is a safety feature. Ifyou are unable to insert the plug into the outlet, contact an electrician.Do not defeat the purpose of the grounding plug. Do not removeWARNING:TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER.CAUTION: To assure continued compliance, follow the attached installation instructions, which includesusing the provided power cord and shielded interface cables when connecting to computer orperipheral device. If you use serial port to connect PC for external control of projector, you mustuse commercial RS-232C serial interface cable with ferrite core. Any unauthorized changes ormodifications to this equipment will void the user’s authority to operate.