Panasonic PT-VW431DU Operating Instructions Manual

Also see for PT-VW431DU: Specifications

Contents

Network66 - ENGLISHSettingsComputer ProjectorNetwork connection example for Twistedpair cable ExtenderLAN cable(straight)LAN cable (straight)Twisted pair cableExtenderLAN cable(straight)HubNotes on Twisted pair cable Extender connectionsRequest the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work isznot properly conducted, the cable transmission characteristics do not meet, and the images and sounds maybe interrupted or become unstable.For the LAN cable between the Twisted pair cable Extender and the projector, use the cable that conformszwith the following conditions. Compatible to the CAT5e or a higher standard Shield type (including the connector) Straight wire connection Single wireThe maximum transferable distance is 100 m (328'11") between the Twisted pair cable Extender andzthe projector. When the distance is longer than this maximum distance, the image or the sound may beinterrupted, or erroneous performance occurs in LAN.When installing the cable, confirm that the cable specification satisfies the characteristics of CAT5e or higher byzusing a cable tester or a cable analyzer. When a relay connector is used in the middle, measure in a conditionthat the relay-connector is included.Do not use the switching hub between the Twisted pair cable Extender and the projector.zWhen connecting to the projector using the Twisted pair cable Extender (receiver) of other maker, do not usezanother Twisted pair cable Extender between the Twisted pair cable Extender of other maker and the projector.The images and sounds may be interrupted or become unstable.Do not pull the cable with a strong force. In addition, do not bend or fold forcedly.zThe projector becomes easier to get affected by the internal noise, as well as the external noise. Therefore,zinstall and use the cable without being wound as much as possible.Do not bind the cables between the Twisted pair cable Extender and the projector with other cables, especiallyzthe power cable. Keep the distance from other parallely set cables as far as possible.When connecting multiple cables, shorten the parallelly passing distance as short as possible.zConfirm that the signal quality is -12 dB or lower in [DIGITAL LINK status] after connecting the cable.zForthe Twisted pair cable Extenders of the other maker, refer to the following URL.zhttp://panasonic.net/avc/projector/Twisted pair cable Extender connectionsThis projector is able to receive image and video signal from Twisted pair cable Extender via LAN cable.