Image adjust48 - ENGLISHSettingsSharpnessPress ▲▼ to select [Sharpness].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )Operation Adjustment AdjustmentrangePress ►.increase thesharpness of theimageMaximumvalue 15Press ◄.decrease thesharpness of theimageMinimumvalue 0NoteWhen [Daylight View] is set to [On] or [Auto], thez[Sharpness] is disabled.GammaAdjust the gamma value to obtain a better balance ofcontrast.Press ▲▼ to select [Gamma].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the gamma value3 )to obtain a better balance of contrast.Adjustments can be made betweenz 0 and 15.Noise reductionReduces noise when viewing old video or otherimages affected by noise.Press ▲▼ to select [Noise reduction].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to select the desired item.3 )Off DisabledL 1 Lower reductionL 2 Higher reductionNoteWhen input video signal to the projector, [Noisezreduction] will become available.[Noise reduction] can not be selected when [480p], [576p],z[720p], [1035i], [1080i], [D-480p], [D-576p], [D-720p],[D-1035i], [D-1080i], or [D-1080p] is selected in [System]Menu.ProgressiveAn interlaced video signal can be displayed inprogressive mode.Press ▲▼ to select [Progressive].1 )Press the button to display2 )the dialog box.Press ◄► to select the desired item.3 )Off DisabledL 1 For an active pictureL 2 For a still pictureFilm For watching a filmNoteWhen input video signal to the projector, [Progressive]zwill become available.[Progressive] can not be selected when [480p], [576p],z[720p], [1035i] , [1080i], [D-480p], [D-576p], [D-720p],[D-1035i], [D-1080i], or [D-1080p] is selected in [System]Menu.ResetTo reset the adjusted data, all adjustments will returnto their previous figures.Press ▲▼ to select [Reset].1 )Press the button.2 ) A confirmation box appears and then select [Yes].zNoteTo reset the adjusted data except [z Daylight View].StorePress ▲▼ to select [Store].1 )Press ► or the button.2 )Press ▲▼ to select one from Image 13 )to 4 and press the button.A confirmation box appears and then select [Yes].zNoteTo store the adjusted data except [Daylight View].zMake sure you selected [Store] after adjustingzsettings. Some settings can not be stored if notregistered with Store function.