40 - ENGLISHSettingsInput menuSelect [Input] from the Main Menu (see“Navigating through the menu” on page 37),then select the item from the sub-menu.Remote Control Control PanelComputer 1: RGB/Component/RGB (Scart)Projects the image of [Computer 1] input.Press ▲▼ to select [Computer 1].1 )Press ► to access the submenu.2 )Press ▲▼ to select [RGB],3 )[Component] or [RGB(Scart)] and thenpress the button.NoteWhen the Input Search function is set to [On 1] orz[On 2] in the Auto setup function, the input signal will besearched automatically.The [System] cannot be selected when selecting [RGBz(Scart)].Computer 2: RGBProjects the image of [Computer 2] input.Press ▲▼ to select [Computer 2 (RGB)]and then press the button.NoteWhen [Monitor out] is selected in the [Terminal]zof the setting menu, [Computer 2(RGB)] cannot be selected. Pressing button on the remote control displays [Monitorout].HDMIProjects the image of [HDMI] input.Press ▲▼to select [HDMI] and then pressthe button.VideoProjects the image of [Video] input.Press ▲▼ to select [Video] and thenpress the button.S-videoProjects the image of [S-video] input.Press ▲▼ to select [S-video] and thenpress the button.DIGITAL LINKProjects the image of [DIGITAL LINK] input.Press ▲▼ to select [DIGITAL LINK] andthen press the button.System[System] is displayed below the sub menu.Press ▲▼ to select [System] and then1 )press ► or the button toaccess the submenu.Press ▲▼ to select the desired system2 )and then press the button.J For computer inputAutoWhen there is no input signalcompatible with the signal froma connected computer on theprojector, the automatic PCadjustment function works and[Auto] is displayed on the system.If images are not being correctlyprojected, manually adjust thesettings to suit your computerand register in [Store].- - - -There is no input signal from thecomputer.Check the connections.Mode 1-Mode 10Displays the mode registeredwith [Store] in [PC adjust].NoteFor the supported signals of the projector, see “Listzof compatible signals”. (Æpages 94-97)