| 
SettingENGLISH - 53 SettingsSettingSelect [Setting] from the Main Menu (see“Navigating through the menu” on page 37),then select the item from the sub-menu.Remote Control Control PanelLanguagePress ▲▼ to select [Language].1 )Press ► or the button.2 )Press ▲▼ to select the desired3 )language.The language used in the On-Screen Menu iszavailable in English, German, French, Italian,Spanish, Portuguese, Dutch, Swedish, Finnish,Norwegian, Danish, Polish, Hungarian, Romanian,Czech, Russian, Turkish, Arabic, Kazak,Vietnamese, Chinese, Korean, Japanese and Thai.Menu positionThis function is used to change the position of the On-Screen Menu.Press ▲▼ to select [Menu position].1 )Press the button to change2 )the position.The Menu position changes each time youzpress button as follows:the center → the bottom left → the bottom right → thetop left → the top right → the center......Auto setupPress ▲▼ to select [Auto setup].1 )Press ► or the button.2 )Press ▲▼ to select these functions as3 )follows:J Input searchThis function detects the input signal automatically.When a signal is found, the search will stop.Off Input search will not workOn 1 Input search works*1On 2 Input search works*2● When pressing the button on the*1 :remote control or the control panel.●*2 : When turning on the projector by pressing the < >button on the remote control or the control panel.●● When pressing the button on theremote control or the control panel.● When the current input signal is cut off.** If the AV mute or Freeze function is active, cancelit to activate the Input search. It is also unavailablewhen On-Screen menu is displayed.Auto PC adj.JOn Enables Auto PC adjustment *1Off Disables Auto PC adjustmentWhen pressing the button on*1 :the remote control or the control panel.Auto keystoneJAuto Always works and corrects keystonedistortion according to the projector's tilt.Manual Works only when pressing the SETUP> button on the remote control orthe control panel.Off Disables Auto Keystone.Note[Input search], [Auto PC adj.] and [Auto Keystone] cannotzbe set [Off] at the same time.The Auto Keystone function cannot work when thez[Ceiling] feature is set [On] in the [Screen] menu. |
