Network64 - ENGLISHSettingsNetwork controlSet when you want to control the projector from acomputer connected to the network.Press ▲▼ to select [Network control].1 )Press button to select [On]2 )or [Off] with the ▲▼ buttons.Network statusThis function shows the LAN setting environment ofthe currently selected projector.Press ▲▼ to select [Network status].1 )Press button or the ► button2 )to show the information of the currentprojector status.AMX D.D.This function allows the projector to be detected byAMX Device Discovery. For more details, visit thefollowing website.http://www.amx.com/Press ▲▼ to select1 ) [AMX D.D.].Press2 ) button to select [On]or [Off] with the ▲▼ buttons.RoomViewThis function allows the projector to monitor andcontrol the projector through network with CrestronRoomView.Press ▲▼ to select1 ) [RoomView].Press2 ) button to select [On]or [Off] with the ▲▼ buttons.This projector supports the following applicationsoftware from Crestron company.• RoomView Express• Fusion RV• RoomView Server Edition"Crestron RoomView" is a system developed byCrestron Electronics, Inc. which collectively manageand control multiple system devices connected viathe network, from a computer. This projector supports"Crestron RoomView".For details of "Crestron RoomView", refer to the CrestronzElectronics, Inc. website (Provided only in English).http://www.crestron.com/For the download of "RoomView Express", refer to theCrestron Electronics, Inc. website (Provided only inEnglish).http://www.crestron.com/getroomviewExtron XTPTo carry out connection settings with XTP Transmittermade by Extron. Visit the following website for details.http://www.extron.comPress ▲▼ to select1 ) [Extron XTP].Press2 ) button to select [On]or [Off] with the ▲▼ buttons.Digital Interface BoxDisplay the Setup menu of the Digital Interface Box.Press ▲▼ to select1 ) [Digital InterfaceBox] and press button.Switch to the menu of Digital Interface Box.zNoteThis function can be selected when Digital interface boxz(ET-YFB100G) is connected to terminal.[RETURN] button will display in the operation GUIDEzof the Digital Interface Box MENU. In this projector ,the[MENU] button equals to [RETURN] button.This function is unavailable when [Extron XTP] is set toz[On].Network factory defaultYou can reset the network setting to the factorydefault of the projector.Press ▲▼ to select [Network factory1 )default], and press button.A confirmation box appears and select2 )[Yes] and then press button.Another confirmation box appears and3 )select [Yes] and then press button.
