Panasonic WJ-ND400 Operating Instructions Manual

Also see for WJND400 - NETWORK DISK RECORDER: Brochure Reference Product catalog Operating instructions Manual

Contents

Schedules43Program settingsItem Settings DescriptionModel Shows the model number of the selected camera.Compression Shows the compression format of the recorded image.• To change the compression format, refer to "NW camera(page 48)".MeasurementMax. network speed (Mbps) Shows the maximum bit rate on the network being used whenthe [Measurement] button is clicked.Max. bit rate (ips) Shows the maximum recording rate on the network being usedwhen the [Measurement] button is clicked.• A red rate setting value indicates that live images orrecording of the image may not be possible at the specifiedrate.Recorder setup - Live videoRate Off *1 / 1ips *2 / 2ips / 3ips / 5ips /10ips / 15ips / All*3 / I-FrameSpecifies the live image rate of the camera image.• Available settings differ according to the currently selectedcompression format. Refer to "Checking and changing acamera (Manually setting) (page 50)" for details aboutcompression method settings.Audio Off *1*2*3 / On Specifies whether audio should be transmitted with live images.• Audio and live video are sent at the same time. Audio cannotbe transmitted unless live images are transmitted.• Audio transmitting can be selected only for a camera modelthat supports audio transmitting.Recorder setupManual rec. Off*1 / 0.1ips / 0.2ips / 0.3ips /0.5ips / 1ips*2 / 2ips / 3ips / 5ips /10ips / 15ips / All / I-Frame *3Specifies the recording rate for manual recording.Available settings differ according to the currently selectedcompression format.Schedule rec. Off*1*2*3 / 0.1ips / 0.2ips / 0.3ips /0.5ips / 1ips / 2ips / 3ips / 5ips /10ips / 15ips / All / I-FrameSpecifies the recording rate for schedule recording.Available settings differ according to the currently selectedcompression format.Recorder setup - Event rec. - Pre-eventRate Off *1*2*3 / 1ips / 2ips / 3ips / 5ips /10ips / 15ips / All /I-FrameSpecifies the rate of pre-event recording.• Available settings differ according to the currently selectedcompression format. Refer to "Checking and changing acamera (Manually setting) (page 50)" for details aboutcompression method settings.• [All] cannot be selected when [M-JPEG] is selected as thecompression format.Duration 2s / 5s / 10s*1*2*3 / 20s / 30s / 1min /3min / 5min / 10min / 15minSpecifies the time of pre-event recording.• Pre-event recording on a camera channel for which a pre-recording area has been made on the HDD is performed atall times by the pre-recording area in the HDD. Refer to"Pre-event recording area formatting (page 88)" for detailsabout pre-recording area.• For guidelines on times in pre-event recording when the pre-recording area has not been made on the HDD, refer to thememo at page 44.Recorder setup - Event rec. - Post-eventRate Off *1*2*3 / 1ips / 2ips / 3ips / 5ips /10ips / 15ips / All /I-FrameSpecifies the rate of post-event recording.• Available settings differ according to the currently selectedcompression format. Refer to "Checking and changing acamera (Manually setting) (page 50)" for details aboutcompression method settings.