Playback22Playback images from a designated time and date. You can alsoplayback while recording.1 Click the [Cam. select] button.The camera list is displayed in the [Cam. select] box.2 Click the camera channel you want to play back.3 Click the [Go to date] button on Playback PointOperation area.This displays the [Go to date] window.4 Click the [V] button and select the time and date of theimage to play back.• Standard channelIf cameras are setup in multiple countries, you must setwhich camera channel time and date to use as standard.If the recorder and the camera are set in the same timezone, set to [--].5 Click the [PLAY] button."Playing [Step 1]" is displayed in the status display area andimages recorded at the designated time and date are playedback.• Refer to page 20 for information about operations duringplayback.6 On the [HDD] tab, click the [STOP] button."Playing [Step 1]" disappears from the status display areaand playback is stopped.• The live image from the camera is displayed in the Imagedisplay.Note:• When an MPEG-4 image is being played back, playback maystart from a point several seconds before or after thedesignated time and date.• To playback SD memory data saved on the recorder, displaythe rec event list and search for the recorded event to playback(page 24).Playback is not possible by playing back from the designatedtime and date.• Where there is no image for the designated time and date, theimage closest to the entered time and date is played back.Search for and playback recorded events on the rec event list (recevent search).Note:• When doing a rec event search, the area that can be searcheddepends on the disk area that is selected.Refer to page 26 for details about area selection.Playback from a designated timeand dateSearch for and playback images
