Panasonic WJ-ND400 Operating Instructions Manual

Also see for WJND400 - NETWORK DISK RECORDER: Brochure Reference Product catalog Operating instructions Manual

Contents

Server60Use the following procedure to configure settings to use the proxy server.1 Click the [Server] button on the setup menu.2 On the sub-menu that appears, click [Proxy].This will display the "Proxy setting" window.3 Configure the settings for each item.Refer to “Proxy settings” table for details about the settings.4 Click the [Set] button.Proxy settings♦Initial defaultProxyItem Settings DescriptionProxy setup use Off♦ / On Specifies whether a proxy server is used.• When [On] is selected, configure the [Server address], [Portnumber], and [Exceptions] settings.Server address Address input(Blank♦)Enter the name or IP address of the proxy server. Whenentering a server name, you must use the DNS.• Enter up to 255 single-byte alpha-numeric characters,including hyphen (-) and period (.).Port number Port number input(80♦)Enter the proxy server port number.Exceptions Address input(Blank♦)Specifies cameras that do not use the proxy server. Enter the IPaddresses of the exception cameras.• Enter up to 128 single-byte alphanumeric characters,including asterisk (*) and period (.).• When specifying multiple addresses, separate them bysemicolons (;). You can use the "*" special character torepresent any number.