User management68Use the following procedure to configure settings to assign recorder administrator privileges to a user (administrator).The administrator name and password can be changed, and the operation level and other operation privileges can be configured.1 Click the [User mng.] button on the setup menu.2 On the sub-menu that appears, click [Administrator].This will display the "Administrator Settings" window.3 Configure the settings for each item.Refer to “Administrator settings” table for details about thesettings.4 Click the [Set] button.Administrator settings♦Initial defaultAdministratorImportant:• Administrator settings can be configured only by a user who is logged in as an administrator.• If you do not change the administrator password, a prompt to change the password will appear on the display after log in.Item Settings DescriptionAdministrator name Name input(ADMIN♦)Change the administrator name here.• Enter between 5 and 14 single-byte alphanumericcharacters.New passwordRetype new passwordEnter password(Blank♦)Enters the password.• Enter between 5 and 8 single-byte alphanumeric characters.• Use a password that is not easily guessable by anotherperson. Also, take care that you do not forget the password.• To ensure security, change passwords periodically.Level LV1♦ Shows the user level. The level of the administrator is [LV1],which cannot be changed.• For operations that can be performed at each level, refer to"User level (page 73)".Access priority 0♦ Shows the priority sequence for operations when multiple usersare logged in on the recorder at the same time. The accesspriority of the administrator is [0] (highest), which cannot bechanged.Default screen [Cam.1]♦ to [Cam.64] / [Cam.1-4]/ [Cam.5-8] / to / [Cam.61-64] /[Seq]Specifies the live image displayed immediately after log in.• [Selecting [Cam.1] to [Cam.64] displays the images of theselected cameras on a 1-image screen.• Selecting [Cam.1-4] to [Cam.61-64] displays the live imagesof the selected cameras on a 4-image screen.• Selecting [Seq] displays images in a specified sequence.Camera partitioning [View/Operate]♦ Shows the scope of control for each camera channel. Thescope of the administrator is [View/Operate], which cannot bechanged.
