User management69Use the following procedure to configure information (user name, password, operation level, etc.) about recorder users.Up to 32 users can be registered.1 Click the [User mng.] button on the setup menu.2 On the sub-menu that appears, click [User].This will display the "User Settings" window.3 Configure the settings for each item.Refer to “User setups” table for details about the settings.4 Click the [Registration] button.5 If you want to configure settings for more users, repeatsteps 3 and 4.6 To complete user registration, click the [Set] button.User setups♦Initial defaultUsersItem Settings DescriptionUser name Name input(Blank♦)Enters the user name.• Enter between 5 and 14 single-byte alphanumericcharacters.Password Enter password(Blank♦)Enters the password.• Enter between 5 and 8 single-byte alphanumeric characters.• Use a password that is not easily guessable by anotherperson. Also, take care that you do not forget the password.• To ensure security, change passwords periodically.Level LV1♦ / LV2 / LV3 / LV4 Specifies the user level.• For operations that can be performed at each level, refer to"User level (page 73)".Access priority 1♦ to 16 Specifies the priority sequence for operations when multipleusers are logged in on the recorder at the same time.Default screen [Cam.1]♦ to [Cam.64] / [Cam.1-4]/ [Cam.5-8] / to / [Cam.61-64] /[Seq]Specifies the live image display immediately after log in.• Selecting [Cam.1] to [Cam.64] displays the images of theselected cameras on a 1-image screen.• Selecting [Cam.1-4] to [Cam.61-64] displays the live imagesof the selected cameras on a 4-image screen.• Selecting [Seq] displays images in a specified sequence.Camera partitioning [View/Operate]♦ / [View] / [--] Specifies the scope of control for each camera channel.• When [View/Operate] is selected, live/recorded imagedisplay or camera operation can be performed.• When [View] is selected, live/recorded image display can beperformed, but camera operation cannot.• When [--] is selected, neither live/recorded image display norcamera operation can be performed.Important:• You must click press the [Set] button to activate settings on the recorder when registering, editing, or deleting users.
