112q MATRIX SWITCHER CONFIGURATIONSSelect and enter the same parameters for the followingas set for the WJ-SX550 A/B, except the NT204 UNITADDRESS.OPERATOR NUMBERPASSWORDWAIT TIMECONTROL PROCEDURESCONTROL PRIORITY(RS232C)NT204 UNIT ADDRESSWhen NONE ENQ is selected for CONTROL PROCE-DURES, set the address to “1”.When ENQ/ACK is selected, set an appropriateaddress .w VIDEO-INPUT NUMBER AND MONITOR-OUT CHAN-NEL SETUPSet a channel number for the monitor output of the WJ-SX550B Matrix Switcher to be connected to the videoinput connector on the WJ-NT204 network interfaceunit. The status when selecting VIDEO-INPUT (at WJ-NT204) in the previous page table is the same as whena monitor compatible with the WJ-SX550B is selected. Control OperationOn the Location bar, type the URL http://192.168.0.10/ to access the WJ-SX550B OPERATION VIEW window for the MatrixSwitcher.qwert!4oy!0 !1i!2uq WJ-SX550 A/B OUTPUTSelects any of the four video inputs of the Interface Unitfor display on the monitor. Set the monitor outputs ofthe Matrix Switcher to match the video inputs of theInterface Unit.The video channels will be switched in accordancewith the operating mode selected.w CAMERA SELECT (Left window panel)To select a camera (camera 01 to 08) connected to theWJ-SX550B Matrix Switcher. The image of the selectedcamera is displayed on the monitor in the previouslyselected input mode.e PRESET SELECT (Left window panel)To move the combination camera (option) connected tothe WJ-SX550B to any of 8 preset positions.r CAMERA PRESET REGISTRATIONRegister up to 64 camera preset positions of that thecameras connected to the WJ-SX550 A/B.!5!3
