76 Main Page (with Camera Control)This page appears when a user authorized level 2 or higher made access, and the MODE SETUP is set as follows.MODE SETUPCAM CONTROL: OTHERSAUX SYSTEM: NT204 Random Input Selection Modeq INPUT SELECTThese buttons are used to switch images of up to fourcameras.w PRESET SELECTTo move the combination camera (option) connected tothe WJ-NT204 to any of 8 preset positions.To register preset positions refer to the CAMERASETUP MENU on page 91.e ALARM LISTCamera video input before and after alarm input canbe temporarily stored in the internal memory of the WJ-NT204.For alarm display see ALARM LIST on page 78.r ALARM RESETClick this to reset the activated alarm mode. The alarminformation will disappear in the STATUS window.t CAMERA PRESET REGISTRATIONPreset registration can be made for the Combinationcamera connected to the WJ-NT204 as follows.While displaying the desired image position, select theposition number, then press the SET button.y PAN/TILTClick on any of the pan/tilt buttons: Up, Down, Right orLeft to move the pan/tilt head of the Combination cam-era to the desired direction. Click the button repeatedlyas necessary not holding down it.u ZOOMClick the button to zoom in or out. Instead holdingdown the button, click on it repeatedly as necessary.TELE: Zooms in the image.WIDE: Zooms out the image.i FOCUSClick NEAR or FAR to adjust the focus of the imagemanually. Instead holding down the button, click on itrepeatedly as necessary.NEAR: Manual focusingFAR: Manual focusingAUTO: The built-in focus mechanism performs in theCombination camera.qwert!2!3y u o !1i !0
