Panasonic WJ-NT204 Operating Instructions Manual

Also see for WJNT204 - NETWORK IF UNIT: Operating instructions

Contents

48 600 MAINTENANCEA variety of maintenance menus can be used in both theControl and Remote sites. Menu window changes depend-ing on the site set (to a Transmitter or Receiver) and also onthe communication status.Maintenance menu in standby mode is shown below.During communication, the receiver displays the menu asshown below.610 ALARM LOGThe Remote site calls the Control site to inform the alarmactivation. The ALARM LOG in the Remote site (transmitter)records the calling history while the reception history isstored in the Control site (receiver). The Remote site logcan be seen from the Control site if necessary. The olderrecords are overwritten when more than 100 events takeplace. The 612 ALARM LOG (RECEIVER) will be replacedwith a dashed line when the unit is set to a transmitter.1. Open the 610 ALARM LOG menu.2. Move the cursor to the 611 or 612, then press theENTER. The selected menu appears.611 ALARM LOGThe latest information is sent from the transmitter when thismenu is opened on the receiver.1. Open the 611 ALARM LOG (TRANSMITTER) menu.A page displays 10 events including the event number,date, time and sensor number (ALM#). Time and dateare based on the transmitter’s internal clock.Use the D or C button to scroll up or down the page.2. Press the ESC button to return the menu back to theprevious.612 ALARM LOG (Receiver only)This menu is only used in the Control site.1. Open the 612 ALARM LOG (RECEIVER) menu.A page displays 5 events including the event number,date, time, sensor number (ALM#) and the name oraddress of the caller site. Time and date displayed onthe monitor are based on the receiver’s internal clock.Use the D or C button to scroll up or down the page.2. Press the ESC button to return the menu to the previ-ous.3. Press the DELETE button to quit the 612 menu.A message asks you YES or NO. Select either one withthe A or B button, then press the ENTER.YES: Stops displaying the ALARM LOG.NO: Continues the 612 menu.611 ALARM LOG(TRANSMITTER) 1/10NO. DATE TIME ALM#96 JAN.03.01 12:32:23 195 JAN.03.01 09:56:26 194 JAN.03.01 05:55:55 493 JAN.03.01 03:46:40 592 JAN.02.01 23:13:05 191 JAN.02.01 21:58:47 390 JAN.02.01 17:15:23 189 JAN.01.01 06:30:34 288 JAN.01.01 03:15:00 187 JAN.01.01 00:01:30 1↑:NEXT ALARM ↓:PRV ALARM ESC:PRV612 ALARM LOG(RECEIVER) 1/1NO. DATE TIME ALM#2 JAN.03.01 15:49:34 2192.168. 0 121 JAN.01.01 15:45:21 5Trans.01↑:NEXT ALM ↓:PRV ALM DEL:CLR ESC:PRV600 MAINTENANCE610 ALARM LOG↓--- -----630 COM RATE/INFO.↓640 CALLING LOG↓650 SERIAL DATA PORT↓660 LOCAL LOOPBACK↓670 VERSION↓--- -----690 INITIALIZE↓↑↓:MOVE ENT:SELECT ESC:PRV610 ALARM LOG611 ALARM LOG(TRANSMITTER)↓612 ALARM LOG(RECEIVER)↓↑↓:MOVE ENT:SELECT ESC:PRV600 MAINTENANCE610 ALARM LOG↓620 REMOTE CLOCK SET↓630 COM RATE/INFO.↓640 CALLING LOG↓650 SERIAL DATA PORT↓--- -----670 VERSION↓680 MODE DISP.↓--- -----↑↓:MOVE ENT:SELECT ESC:PRV