5 Diagnostics5-10NetPath 110 User’s Manual - Installation Guide980-001-0240BNovember 2000CSU/DSXStatisticsHistoryThe CSU/DSX Statistics History screen displays all performance parameters for theCSU and DSX for each of the 96 possible, 15-minute intervals.The first history screen (1 of up to 6) is accessed by selecting ViewHistory [VH] fromthe CSU Statistics Summary screen.The first page of the CSU/DSX History screen is shown in Figure 5-6.Figure 5-6 CSU/DSX Statistics History ScreenPage - Selects the desired History page.Near End and Far End statistics are as described for the previous screen (CSU/DSXStatistics Summary).Interval “1” shows the statistics for the most recently completed interval of theprevious 24 hours.The interval can be displayed as time-of-day rather than a simple count of intervals byincluding the “current_time” parameter with the command to enter this screen, as de-scribed on the previous page of this manual.Test/(*=Bkp):Test - Displays the last Telco or operator-activated test (if any) that was activeduring the interval./(*=Bkp) - Field is only displayed if the unit is optioned with an ISDN Adaptermodule. The character “*” in this field indicates the aggregate link was out ofservice at some point during the interval due to tests (or backup).************************* CSU / DSX Statistics History *************************Name: F@43802Page [P=#]: 1 of 6 Facility ID: NONAMEPast --------- Near End --------- -TEST/(*=Bkp)- ------- Far End -------Int. ES SES UAS BES CSS LOFC ES SES UAS BES CSS1 0 0 900 0 0 0 / 0 0 0 0 02 0 0 900 0 0 0 / 0 0 0 0 03 0 0 900 0 0 0 / 0 0 0 0 04 0 0 900 0 0 0 / 0 0 0 0 05 0 0 900 0 0 0 / 0 0 0 0 06 0 0 900 0 0 0 NetwSetLine /* 0 0 0 0 07 0 0 900 0 0 0 / 0 0 0 0 08 0 0 900 0 0 0 / 0 0 0 0 09 0 0 900 0 0 0 / 0 0 0 0 010 0 0 900 0 0 0 / 0 0 0 0 011 0 0 900 0 0 0 / 0 0 0 0 012 0 0 900 0 0 0 / 0 0 0 0 013 0 0 900 0 0 0 / 0 0 0 0 014 0 0 900 0 0 0 / 0 0 0 0 015 0 0 900 0 0 0 / 0 0 0 0 016 0 0 900 0 0 0 / 0 0 0 0 0Help[?] Close[X]>
