Paradyne NP 110 User Manual

Also see for FrameSaver NP 110: Installation quick reference guide

Contents

Paradyne NP 110 User Manual Manual pdf 99 page image

5 Diagnostics5-32NetPath 110 User’s Manual - Installation Guide980-001-0240BNovember 2000Alarms FrameSaver NP 110 generates “traps” (SNMP alarms or alerts) in response to certaindetected network conditions. The traps are reported either In-band utilizing the Man-agement PVC, or via Dial-Out utilizing the internal Modem. The traps are also loggedto an SNMP retrievable event log. Alarm conditions are also displayed on FrameSaverNP 110 status screens and on front panel indicators.Traps The conditions (objects) which generate traps are included in the FrameSaver NP 110Private MIB Extension and are listed in Table 5-3.Table 5-3 Traps - Private MIB ExtensionCom-ponent Object DescriptionTrapReportedIn-Band/ModemT1 Facility Carrier Loss(Red, Blue or Yellow)Carrier status of T1 facility. Modem* andIn-BandTotal Secs in error(ES + UAS)Errored seconds based on the current interval performance. In-BandCSU CSU Fault Unit subsystem failed self-test. Modem* andIn-BandLMI LMI Netw Failure Errored LMI response per N392/393 counters on Network side. Modem* andIn-BandLMI User Failure Errored LMI enquiries per N392/393 counters on User side. In-BandLink Data Network Frame Errors Secs Errored seconds based on the current interval performance. In-BandUser FrameErrors SecsErrored seconds based on the current interval performance. In-BandBECN/FECNSecs (max PVC)Highest BECN/FECN seconds of all PVCs based on the current intervalperformance.In-BandPVC Dropped MonitorPacketsHighest Dropped packet count of all PVCs based on the current intervalperformance.In-BandPVC Delaymsec (max PVC)Highest PVC round trip delay of all PVCs based on the current intervalperformance.In-BandPVC Delivered Packets(%)Lowest percentage of Delivered packets of all PVCs based on current intervalperformance.In-BandPVC Available PVC going from non-Active to Active as reported by frame switch. In-BandPVC Unavailable PVC going from Active to non-Active as reported by frame switch. In-BandDTE DTR Loss Returns state of DTR lead. In-BandDTE Power Loss Returns state of DTE Power indication. In-BandPower FrameSaver NP PowerLossState of AC power into unit. Reports on loss only. Sent to first trap manageronly.In-BandModem Modem Failure Modem failed self-test which is initiated periodically. In-BandDial Line Failure Dial line failed self-test which is initiated periodically. In-BandSecurity Security Violation(Login)Identifies access point of failed login attempts(3 consecutive): Console, Modem, Telnet, UDP, or SNMP.In-BandAuthentication Failure Unauthorized SNMP Community Access detected (community notconfigured for access).In-Band* Modem-Reported Traps are only issued on the occurrence of a primary facility failure and provided that the modem is not already in use whenthe trap occurs.