Introduction C3I12T1114 192-120113 N08 C3I12T11 - December 20101.4 Packaging, transport, storagePackaging material and transportCaution!The packaging material is inflammable, if it is disposed of improperly by burning,lethal fumes may develop.The packaging material must be kept and reused in the case of a return shipment.Improper or faulty packaging may lead to transport damages.Make sure to transport the drive always in a safe manner and with the aid ofsuitable lifting equipment (Weight (see on page 384, see on page 372)). Do neveruse the electric connections for lifting. Before the transport, a clean, level surfaceshould be prepared to place the device on. The electric connections may not bedamaged when placing the device.First device checkup Check the device for signs of transport damages. Please verify, if the indications on the Type identification plate (see on page 13)correspond to your requirements. Check if the consignment is complete.DisposalThis product contains materials that fall under the special disposal regulation from1996, which corresponds to the EC directory 91/689/EEC for dangerous disposalmaterial. We recommend to dispose of the respective materials in accordance withthe respectively valid environmental laws. The following table states the materialssuitable for recycling and the materials which have to be disposed of separately.Material Option suitable forrecycling DisposalMetal yes noPlastic materials yes noCircuit boards no yesPlease dispose of the circuit boards according to one of the following methods: Burning at high temperatures (at least 1200°C) in an incineration plant licensed inaccordance with part A or B of the environmental protection act. Disposal via a technical waste dump which is allowed to take on electrolyticaluminum condensers. Do under no circumstances dump the circuit boards at aplace near a normal waste dump.StorageIf you do not wish to mount and install the device immediately, make sure to store itin a dry and clean environment (see on page 386). Make sure that the device isnot stored near strong heat sources and that no metal chippings can get into thedevice.
