Parker EME Technical Characteristics192-120113 N08 C3I12T11 - December 2010 381Special encoder systems for directdrives Option F12Analog hall sensors Sine-Cosine signal (max. 5Vss*; typical1Vss) 90° offset U-V signal (max. 5Vss*; typical 1Vss)120° offset.Encoder(linear or rotatory) Sine-Cosine (max. 5Vss*; typical 1Vss)(max. 400kHz) or TTL (RS422) (max. 5MHz; track A o. B)with the following modes of commutation: Automatic commutation (see on page329) or U, V, W or R, S, T commutation signals(NPN open collector) e.g. digital hallsensors, incremental encoders made byHengstler (F series with electricalordering variant 6)Digital, bidirectional interface All EnDat 2.1 or EnDat 2.2 (Endat01,Endat02) feedback systems withincremental track (sine-cosine track) linear or rotary max. 400kHz Sine-CosineDistance coded feedback systems Distance coding with 1VSS - Interface Distance coding with RS422 - Interface(Encoder)*Max. differential input between SIN- (X13/7) and SIN+ (X13/8).Feedback error compensationFeedback error compensation Automatic feedback error compensation (offset &lification) for analog hall sensors and sine-cosine encoder can be activated in theMotorManager.Motor holding brake outputMotor holding brake output Compax3Voltage range 21 – 27VDCMaximum output current (short circuitproof) 1.6ASecuring of brake Compax3M 3.15A
