Parker Hannifin S.p.A S.B.C. Division SLVDN User’s ManualPage 51 of 1818.2. “High” voltage power supplyIn “high ” voltage operating mode (b40.10=0), the converter can supplied as follows:- AC 3-phase network ((200÷230 ±10%) and AC 1-phase network (200÷230±10%)Set b39.0=0 (default).The converter can automatically detect the power supply voltage rating andadapts internal operating parameters accordingly..- Continuous (14÷325 ±10%)Set b39.0=1 and set the nominal value of continuous voltage in Pr206. Save,switch off and on again the converter.The automatic reset of “under voltage” undervoltage alarm can be forced by b99.8=1 with anykind of power supply (it’s necessary save the parameters to enable the command at thesuccessive start up of the drive).
