Chapter 4: KX III Administrator Help2154. Click OK to continue the upgrade. Progress bars are displayedduring the upgrade. Upgrading takes approximately 2 minutes orless per CIM.Upgrading the KX III FirmwareUse the Firmware Upgrade page to upgrade the firmware for your KX IIIand all attached CIMs. This page is available in the KX III Remote Consoleonly.Firmware UpgradeImportant: Do not turn off your KX III appliance or disconnect CIMswhile the upgrade is in progress - doing so will likely result indamage to the appliance or CIMs.To upgrade your KX III appliance:1. Click the Show Latest Firmware link to locate the appropriateRaritan firmware distribution file (*.RFP) on theRaritan websitehttp://www.raritan.com on the Firmware Upgrades web page.2. Unzip the file. Please read all instructions included in the firmwareZIP files carefully before upgrading.Note: Copy the firmware update file to a local PC before uploading.Do not load the file from a network drive.3. Choose Maintenance > Firmware Upgrade. The Firmware Upgradepage opens.4. Click Browse to navigate to the directory where you unzipped theupgrade file.5. Click Upload from the Firmware Upgrade page.Information about the upgrade and version numbers is displayed foryour confirmation (if you opted to review CIM information, thatinformation is displayed as well).
