Chapter 7: Serial Access With Dominion Serial Access Module344Configure Serial Port Keyword ListPort keywords work as a filter. You can create port keywords andassociate them with -• Events• Local/remote syslog messages• SNMP trapsIf a keyword is detected -• A corresponding message is logged in a local/NFS port log.• A corresponding event is sent via SMTP (if configured).• A corresponding trap is sent via SNMP (if configured).This feature is useful for notifying administrators if a particular eventoccurs on a port. Using port keywords to report events does not impactthe NFS log size.For keywords to trigger when no users are connected to a port, "AlwaysActive" must be selected on the port's Port Configuration page.A list of existing port keywords is displayed on the Port Configurationpage as well.To configure serial port keywords:1. Choose Device Settings > Serial Port Keywords. The Serial PortKeyword List page opens.2. Click Add at the bottom of list on the page. The Keyword page opens.3. Type a keyword in the Keyword field.4. Select the Port(s) you want to associate with that keyword.5. Click Add to add them to the Selected box.6. Click OK.Upgrade DSAM FirmwareDSAM firmware is upgraded automatically during KX III device firmwareupgrades if a new DSAM version is detected in the device firmware. Youcan also upgrade your DSAM firmware manually.To upgrade the DSAM firmware manually:1. Choose Maintenance > DSAM Firmware Upgrade.
