Chapter 4: KX III Administrator Help55To cycle the power of an outlet:1. Click Cycle next to the outlet you want to cycle. The Power Cycle Portdialog opens.2. Click OK. The outlet will then cycle (note that this may take a fewseconds).3. Once the cycling is complete the dialog will open. Click OK to closethe dialog.USB ProfilesOverviewTo broaden the KX III's compatibility with different KVM target servers,Raritan provides a standard selection of USB configuration profiles for awide range of operating system and BIOS-level server implementations.The Generic (default) USB profile meets the needs of the vast majority ofdeployed KVM target server configurations.Additional profiles are provided to meet the specific needs of othercommonly deployed server configurations (for example, Linux ® and MacOS X ®).There are also a number of profiles (designated by platform name andBIOS revision) to enhance virtual media function compatibility with thetarget server, for example, when operating at the BIOS level.USB profiles are configured on the Device Settings > Port Configuration >Port page of the KX III Remote and Local Consoles.Administrators configure the port with the USB profiles that best meetthe needs of the user, and the target server configuration.A user connecting to a KVM target server chooses among thesepreselected profiles in the Virtual KVM Client, depending on theoperational state of the KVM target server.For example, if the server is running Windows® operating system, itwould be best to use the Generic profile.To change settings in the BIOS menu or boot from a virtual media drive,depending on the target server model, a BIOS profile may be moreappropriate.Should none of the standard USB profiles provided by Raritan work witha given KVM target, please contact Raritan Technical Support forassistance.
