Chapter 4: KX III Administrator Help56CIM CompatibilityIn order to make use of USB profiles, you must use a virtual media CIMwith updated firmware. For a list of virtual media CIMs, seeSupportedComputer Interface Module (CIMs) Specifications (on page 423).Available USB ProfilesThe current release of the KX III comes with the selection of USB profilesdescribed in the following table. New profiles are included with eachfirmware upgrade provided by Raritan. As new profiles are added, theywill be documented in the help.USB profile DescriptionBIOS Dell ® PowerEdge ®1950/2950/2970/6950/R200Dell PowerEdge 1950/2950/2970/6950/R200 BIOSUse either this profile or 'Generic' profile for Dell PowerEdge1950/2950/2970/6950/R200 BIOS.Restrictions: NoneBIOS Dell OptiPlex ™ Keyboardand Mouse OnlyDell OptiPlex BIOS Access (Keyboard and Mouse Only)Use this profile to have keyboard functionality for the DellOptiPlex BIOS when using D2CIM-VUSB. When using the newD2CIM-DVUSB, use 'Generic' profile.Notice: Optiplex 210L/280/745/GX620 requires D2CIM-DVUSB with'Generic' profile to support virtual mediaRestrictions: USB bus speed limited to full-speed (12 MBit/s) No virtual media supportBIOS Dell Optiplex 790 Use this profile for Dell Optiplex 790 during BIOS operations.Warning: USB enumeration will trigger whenever Virtual Media isconnected or disconnectedRestrictions: USB bus speed limited to full-speed (12 MBit/s) Absolute mouse synchronization not supported Virtual CD-ROM and disk drives cannot be usedsimultaneously
