Chapter 4: KX III Administrator Help228Command Line Interface (CLI)OverviewThe Command Line Interface(CLI) can be used to configure the KX IIInetwork interface and perform diagnostic functions, provided you havethe appropriate permissions to do so.SeeCLI Commands (on page 232) for a list of all the commands,definitions and links to examples.The following common commands can be used from all levels of the CLIto the preceding figure: top, history, logoff, quit, and help.Accessing the KX III Using CLIAccess the KX III by using one of the following methods:• SSH (Secure Shell) via IP connectionA number of SSH clients are available and can be obtained from thefollowing locations:• Putty -http://www.chiark.greenend.org.uk/~sgtatham/putty/http://www.chiark.greenend.org.uk/~sgtatham/putty/• SSH Client from ssh.com -www.ssh.com http://www.ssh.com• Applet SSH Client -www.netspace.org/sshhttp://www.netspace.org/ssh• OpenSSH Client -www.openssh.org http://www.openssh.orgSSH Connection to the KX IIIUse any SSH client that supports SSHv2 to connect to the KX III. Youmust enable SSH access from the Devices Services page.Note: For security reasons, SSH V1 connections are not supported by theKX III.SSH Access from a Windows PCTo open an SSH session from a Windows® PC:1. Launch the SSH client software.2. Enter the IP address of the KX III server. For example, 192.168.0.192.3. Choose SSH, which uses the default configuration port 22.4. Click Open.The login as: prompt appears.SeeLogging In (on page 229).
