Chapter 4: KX III Administrator Help53Rack PDU (Power Strip) Outlet ControlOverviewYou can control Raritan PX and RPC series rack PDU (power strip)outlets connected to the KX III through a D2CIM-PWR.Once connected to the KX III, the rack PDU and its outlets are controlledfrom the Powerstrip page, which is accessed by clicking on the Powermenu at the top of the page.Note: If no powerstrips are connected to KX III, a message stating "Nopowerstrips found" is displayed in the Powerstrip Device section of page.All of the powerstrips you have permissions to access and which areconnected to KX III are listed in the Powerstrip drop-down.Information about the currently selected powerstrip is displayed underthe Powerstrip drop-down. Name Model Temperature Current Amps Maximum Amps Voltage Power in Watts Power in Volts Ampere• Outlet Display Information: Name - Named assigned to the outlet when it was configured. State - On or Off status of the outlet Control - Turn outlets on or off, or cycle their power Association - The target ports associated with the outletIn the case of tiered configurations, the Powerstrip page will display bothrack PDUs attached to the base and tiered KX IIIs, for which the user hasbeen granted appropriate port access permissions.• Outlet Display Information: Name - Named assigned to the outlet when it was configured. State - On or Off status of the outlet Control - Turn outlets on or off, or cycle their power
