12.3 < Troubleshooting>4 Remove the paper from the feed area by carefully pulling.5 Close the white document background and the scanner lid. Thenload the removed pages back into the DADF.Clearing paper jamsWhen a paper jam occurs, the warming message appears on the displayscreen. Refer to the table below to locate and clear the paper jam.Message Location of jam Go toPaper Jam in tray 1Paper Jam in tray2Paper Jam in tray 2(HCF)Paper Jam in tray3Paper Jam in MP trayIn the paper feed area(tray 1, optional tray,or multi-purpose tray)Page 12.4Page 12.5Page 12.6Page 12.7Paper Jam in exit area In the fuser area Page 12.9Paper Jam inside of machine In the paper inside themachinePage 12.7Paper Jam at the bottom ofduplex pathPaper Jam at the top ofduplex pathPaper Jam inside of duplexpathIn the duplex unit Page 12.9Paper jam in front of finisher Paper jammed in thestacker.Page 12.9Paper jam inside finisher,Paper jam inside finisher’sduplexPaper jammed in thestacker.Page 12.10Paper jam at exit of finisher Paper jammed in thestacker exit part.Page 12.11CautionTo avoid tearing the paper, pull the jammed paper out gentlyand slowly. Follow the instructions in the following sections toclear the jam.
