Using Your Printer in Linux36Printers ConfigurationPrinters configuration has the two tabs: Printers and Classes.Printers TabYou can see the current system’s printer configuration byclicking on the printer icon button on the left side of the UnifiedDriver Configurator window.You can use the following printer control buttons:• Refresh: renews the available printers list.• Add Printer: allows you to add a new printer.• Remove Printer: removes the selected printer.• Set as Default: sets the current printer as a defaultprinter.• Stop/Start: stops/starts the printer.• Test: allows you to print a test page to check if themachine is working properly.• Properties: allows you to view and change the printerproperties. For details, see page 38.Shows all of theinstalled printer.Switches to Printerconfiguration.Shows the status,model name andURI of your printer.Classes TabThe Classes tab shows a list of available printer classes.• Refresh : Renews the classes list.• Add Class... : Allows you to add a new printer class.• Remove Class : Removes the selected printer class.Scanners ConfigurationIn this window, you can monitor the activity of scanner devices,view a list of installed Samsung MFP devices, change deviceproperties, and scan images.• Properties... : Allows you to change the scan propertiesand scan a document. See page 39.Shows the status of theclass and the number ofprinters in the class.Shows all of theprinter classes.Switches toScannersconfiguration. Shows all of theinstalled scanners.Shows the vendor,model name and typeof your scanner.
