7.9 < Scanning>Changing the scan feature settingsThis part explains how to adjust the document settings for each scan job,such as resolution, duplex, original size, type, color mode, darkness, andmore. The options you change will be maintained for a certain time, butafter that period, the options will be reset to default values.DuplexThis feature especially applies when the original documents to bescanned are two-sided. You can select whether the machine scans onlyone side of the paper or both sides of the paper.Press Scan to Server > the Basic tab > Duplex.Or, Press Scan to Email > the Options tab > Duplex. Use left/rightarrows to toggle the values.• 1 Sided: For originals that are printed on one side only.• 2 Sided: For originals that are printed on both sides.• 2 Sided, Rotate Side 2: For originals that are printed on bothsides. But the back is rotated 180 degrees.NoteTo use 2 Sided and 2 Sided, Rotate Side 2, you have to loadthe originals on the DADF. Because, if the machine can notdetect the original on DADF, automatically changes the option to1 Sided.ResolutionYou can adjust document resolution.Press Scan to Server > the Basic tab > Resolution.Or, Press Scan to Email > the Options tab > Resolution.Use left/right arrows to toggle the values. The higher value you select theclear result you get. But the scanning time may take longer.Commonly, 100 dpi , 200 dpi and 300 dpi resolution are available onlywhen Color Mode is set to Color or Gray. The following table showsdetailed information feature, resolution and file format options.Feature Resolution (dpi) File FormatScan to Email 100, 200, 300, 600(B/W)100,200,300(Gray,Color)PDF, Single-PageTIFF, Multi-Page TIFF,JPEGScan to PC 75, 150, 200, 300, 600, PDF, Single-PageTIFF, Multi-Page TIFF,JPEGOriginal SizeYou can specify the scanning area on the originals by selecting the pre-defined size, or putting in the margin value or Auto. If you set this optionto Auto, the machine senses and determines the size of the original.Press Scan to Server > the Advanced tab > Original Size.Or, Press Scan to Email > the Options tab > Original Size. Use up/down arrows to go to the next screen. Select the appropriate option andpress OK.Original TypeYou can set the original document type in order to enhance the quality ofa document being scanned.Press Scan to Server > the Image tab > Original Type.Or, Press Scan to Email > the Options tab > Original Type.Select the appropriate option and press OK.• Text: For originals that have text or line art.• Text/Photo: For originals that have both text and photographstogether.• Photo: For originals that are continuous tone photographs.Scan to Server 100, 200, 300, 600(B/W)100,200,300(Gray,Color)PDF, Single-PageTIFF, Multi-Page TIFF,JPEGFeature Resolution (dpi) File Format
