Using Your Printer with a Macintosh49ScanningYou can scan docoments using Image Capture program.Macintosh OS offers Image Capture program.Scanning with USB1 Make sure that your machine and computer are turned onand properly connected to each other.2 Place a single document face down on the document glass.OR load the document(s) face up into the ADF (or DADF).3 Start Applications and click Image Capture.NOTE: If No Image Capture device connected messageappears, disconnect the USB cable and reconnect it. If theproblem persists, please refer to the Image Capture’s help.4 Set the scan options on this program.5 Scan and save your scanned image.NOTE:• For more information about using Image Capture, pleaserefer to the Image Capture’s help.• Use TWAIN-compliant softwares to apply more scan options.• You can also scan using TWAIN-compliant softwares, such asAdobe Photoshop.• Scan process differs according to TWAIN-compliantsoftwares. Please refer to the user’s guide of the software.• When scanning does not operate in Image Capture, updateMac OS to the latest version. Scanning operates propery inMac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.Scanning with network1 Make sure that your machine and computer are turned on.2 Place a single document face down on the document glass.OR load the document(s) face up into the ADF (or DADF).3 Start Applications and click Image Capture.4 For MAC OS X 10.4~10.5Click Devices and click Browse Devices.For MAC OS X 10.6Select your device below SHARED. Skip to step 7.5 For MAC OS X 10.4:Select your machine in Twain devices option. Make surethat Use TWAIN software checkbox is checked, and clickConnect.If a warning message appears, click Change Port.. toselect port.If TWAIN UI appears, from the Preference tab, clickChange Port.. to select port.N OTE: Refer to Scan Manager for Change port.. use. (SeeFor MAC OS X 10.3, use TWAIN-compliant softwares.).For MAC OS X 10.5:Make sure that Connected checkbox is checked besideyour machine in Bonjour Devices.If you want to scan using TWAIN, refer to the MAC OS X10.4 procedure above.6 Set the scan options on this program.7 Scan and save your scanned image.N OTE:• For more information about using Image Capture, pleaserefer to the Image Capture’s help.• Use TWAIN-compliant softwares to apply more scan options.• You can also scan using TWAIN-compliant softwares, such asAdobe Photoshop.• Scan process differs according to TWAIN-compliantsoftwares. Please refer to the user’s guide of the software.• When scanning does not operate in Image Capture, updateMac OS to the latest version. Scanning operates propery inMac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.• For MAC OS X 10.3, use TWAIN-compliant softwares.
