4-28 Chapter 4Business Features PackageStation Feature DescriptionsAdd-On ModuleAdd-on modules (AOMs) add to the capability of a keyset by increasing the number of avail-able programmable keys.14-Key AOM (for iDCS Series Keysets)14 programmable keys with red LEDs can be used for feature keys, DSS/BLF keys or one-touch speed dial keys.48-Key AOM (for DCS Euro Keysets)The 48 programmable keys with red LEDs can be used for feature keys, DSS/BLF keys orone-touch speed dial keys. Up to four 48-key AOMs can be added to each keyset.64-Key AOM (for iDCS Series Keysets)The 64 programmable keys with red LEDs can be used for feature keys, DSS/BLF keys orone-touch speed dial keys. Up to four 64-key AOMs can be added to each keyset. A maxi-mum of five can be installed on a system.64-Key AOM (DS-5064B) for 5000 Series KeysetsThe 64 programmable keys add to the capability of any 5000 series keyset. Up to four 64-keyAOMs can be added to a keyset. A maximum of eight can be installed on a system.Appointment ReminderKeysets with an alarm key can be used like an alarm clock. When programmed for a specifictime, the keyset will sound a distinctive ring to remind the user of meetings or appointments.Alarms can be set for “today” only or for every day at the same time. Up to three alarms maybe set at each keyset. Display keysets can also show a programmed message when thealarm rings.Automatic HoldStation users can enable or disable automatic hold at their keysets. While a user is engagedon an outside (C.O.) call, pressing another trunk key, route key or CALL key automaticallyputs the call on hold when this feature is enabled. Pressing TRANSFER (or TRSF), CON-FERENCE, PAGE or a DSS key will always automatically place the call on hold. This type ofautomatic hold is not a user-selectable option.NOTE: Internal calls cannot be automatically held.Automatic PrivacyAll conversations on outside lines and internal calls are automatically private. The privacyfeature can be turned off on a per-line basis.