28 _Getting Started4. Select Typical installation for a network printer, and then click Next.5. The list of machines available on the network appears. Select the printeryou want to install from the list and then click Next.• If you do not see your machine on the list, click Update to refresh thelist, or select Add TCP/IP Port to add your machine to the network.To add the machine to the network, enter the port name and the IPaddress for the machine.To verify your machine’s IP address or the MAC address, print aNetwork Configuration page. (See "Printing a report" on page 89.)• To find a shared network printer (UNC Path), select Shared Printer[UNC] and enter the shared name manually or find a shared printerby clicking the Browse button.6. After the installation is finished, a window appears asking you to print atest page and to register yourself as a user of Samsung machines inorder to receive information from Samsung. If you so desire, select thecorresponding checkbox(es) and click Finish.MACHINE'S BASIC SETTINGSAfter installation is complete, you may want to set the machine's defaultsettings. Refer to the next section if you would like to set or change values.Altitude adjustmentThe print quality is affected by atmospheric pressure, which is determinedby the height of the machine above sea level. The following information willguide you on how to set your machine to the best print quality or best qualityof print.Before you set the altitude value, find the altitude where you are using themachine.1. Enter your machine’s IP address as the URL in a browser and click Goto access the web site of your machine.2. Log in to the SyncThru™ Web Service as an administrator. (See"Managing your machine from the website" on page 96.)3. Click Settings > Machine Settings > System > Setup > Altitude Adj.4. Select the appropriate altitude value.5. Click Apply.China onlyIf you are not sure of the IP address, contact your networkadministrator or print network information. (See "Printing areport" on page 89.)• If your machine does not work properly after the installation, tryto reinstall the printer driver. See Software section.• During the printer driver installation process, the driver installerdetects the location information for your operating system andsets the default paper size for your machine. If you use adifferent Windows location, you must change the paper size tomatch the paper you usually use. Go to printer properties tochange the paper size after installation is complete.1 Normal2 High 13 High 24 High 30Dan hab yungh youq gij digih haijbaz 2000 m doxroengz haenx ancienz sawjyungh.2000m
