Copying_ 45• Second Image Position: LEFT, TOP : X-105mm/Y-020mm, RIGHT,BOTTOM: X-205mm/Y-100mm• Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT,BOTTOM: X-100mm/Y-230mm• Forth Image Position: LEFT, TOP : X-105mm/Y-150mm, RIGHT,BOTTOM: X-205mm/Y-230mm7 Press OK, the template you have saved will be shown in the templatelist table.8 Press and select Copy.9 Press the Advanced tab > ID Copy > Mamual ID Copy Setup.10 Press the template you have saved from the template list.11 Press the Start button on the control panel. now follow the instructionon display to finish the ID copy for four images2-up or 4-up copying (N-up)The machine reduces the size of the original images and prints 2 or 4 pagesonto one sheet of paper.2 or 4-up copying is available only when you load originals into the DADF.1. Place the originals face up in the DADF. Or place a single original facedown on the scanner glass. (See "Loading originals" on page 32.)2. Press Copy from the Main screen.3. Select the tray in Paper Supply.4. Press the Advanced tab > N-Up.5. Select Off, 2Up, or 4Up.• Off: Copies an original onto one sheet of paper.• 2Up: Copies two separate originals onto one page.• 4Up: Copies four separate originals onto one page.6. Press Start on the control panel.Poster copyingYour original will be divided into 9 portions. You can paste the printed pagestogether to make one poster-sized document. This copy feature is availableonly when you place originals on the scanner glass. Each portion isscanned and printed on by one in the following order.This copy feature is available only when you place originals on the scannerglass.1. Place a single original face down on the scanner glass. (See "Loadingoriginals" on page 32.)2. Press Copy from the Main screen.3. Select the tray in Paper Supply.4. Press the Advanced tab > Poster Copy.5. Press On to activate this feature.6. Press OK.7. Press Start on the control panel to begin copying.Clone copyingThe machine prints multiple original images on a single page. The numberof images is automatically determined by the original image and the papersize.This copy feature is available only when you place originals on the scannerglass.1. Place a single original face down on the scanner glass. (See "Loadingoriginals" on page 32.)2. Press Copy from the Main screen.You cannot adjust the copy size using the Reduce/Enlarge for the N-Up feature.1 21 23 4This feature is available only when the options in the Basic tab areselected as below;- Duplex to 1 -> 1 Sided- Reduce/Enlarge to Original(100%)- Paper Supply to Tray.Your original is divided into 9 portions. Each portion is scanned andprinted one by one in the following order:
