iDCS 100 USER INSTRUCTIONSTECHNICAL MANUAL PART 1 JUNE 20021.121.7 PROGRAMMING PERSONAL SPEED DIALLOCATIONSYou can program frequently dialed telephone numbers in a personal speed dial list.Each station user begins with ten numbers 00–09 and may be assigned up to fiftynumbers. See your system administrator to determine the amount assigned to yourstation.NOTE: Press button B for flash and button C for pause.Display keyset users may want to hide some speed dial numbers so they will not showin the display. Before entering a telephone number, press button E. All digits after thiswill be hidden. Press button E again to begin displaying digits.If your system uses rotary (or pulse) dialing C.O. lines, pressing button D beforeentering a speed dial will cause all subsequent digits to be sent as DTMF tones untilthe D button is pressed again.ACTION DISPLAY1. Press the transfer key followed by 105Display shows[201] SPEED DIAL00:If you have no speed dial bins,the display will be as shown[201] SPEED DIALSPDBLK NOT EXIST2. Dial the location number (e.g., 05)OR[201] SPEED DIAL05:_Press UP or DOWN to select the locationPress the right soft key to move cursor3. Enter the trunk access code (e.g., 9) followedby the number to be dialed (e.g., 4264100)[201] SPEED DIAL05:9-4264100_ORPress the left soft key to return to step 24. Press the F button to access the next programORPress the transfer key to save and exit
