Samsung iDCS 100 User Instructions

Also see for IDCS 14B STRIP: User guide User guide User guide User guide

Contents

43CUSTOMIZING YOUR KEYSETAME PASSWORDThis feature allows people using the AME (Answer Machine Emulation) fea-ture to enable password protection. This will prevent unauthorized peoplefrom listening to your messages being left. The passcode is the same asyour station passcode. This feature only applies if there is a Samsung VoiceMail card installed in the system and your keyset has a programmed AMEkey. See the Keyset User Features in the SVMi-4/SVMi-8 section.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 101 to turn on AME PASSCODE or 100 to turn it off.• Press TRANSFER to store your selection.AUTO CAMP-ON [iDCS 500 L/LE VERSION ONLY]This option allows intercom calls to be automatically camped on, if possible,when a busy station is called.• With the handset on-hook, press TRANSFER and then dial 110.• Press 081 to turn CAMP-ON on or 080 to turn it off.• Press TRANSFER to store your selection.SELECT RING TONEEach keyset user can select any one of eight ring frequencies:• While on-hook, press TRANSFER and then dial 111.• Dial 1–8 or press the UP and DOWN keys to hear each tone.• When you hear the tone that you prefer, press TRANSFER to save it.NOTE: Specific lines or stations may be programmed to ring with a dif-ferent tone than what you have selected for your keyset.CHANGE YOUR PASSCODEFrom the factory, your station passcode is 1234. You can change your sta-tion passcode whenever you desire.• While on-hook, press TRANSFER and then dial 101.• Dial your old passcode.• Dial a new passcode (must be four characters). You can use 0–9.• Redial the new passcode to verify. If successful, you will hear two beeps.Four beeps indicate an incorrect code. Reenter the code again.• Press TRANSFER to store the new passcode.OHVA REJECTYour keyset can be programmed with an OHVA Reject (REJECT) key.Pressing this key while receiving an OHVA call will disconnect the voice an-nouncing party and return you to your original call.IN GROUP/OUT OF GROUPIf your keyset is assigned to a station ring group, you can remove your key-set from the group and then put it back in. While you are out of the group,you can receive calls to your extension number but not calls to the groupnumber. If you have an IN/OUT key:• Press the IN/OUT key. It will light red when your keyset is in the group.• Press the IN/OUT key again to exit the group and turn the light off. Re-peat as necessary.If you do not have an IN/OUT key:• Dial the IN/OUT access code number ________________ plus 0 to exitthe group or 1 to enter the group.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press SPEAKER key.The IN/OUT key can include an extender to indicate the specific group thatthis key will affect. This means that if you are in multiple groups, you can de-cide for which groups you will receive calls.42