Samsung iDCS 100 User Instructions

Also see for IDCS 14B STRIP: User guide User guide User guide User guide

Contents

2827MANAGING KEY ASSIGNMENTSYou can view station key assignments and add extenders to some of the pro-grammable keys for easy one touch operation of frequently used features.An extender is a number that makes an otherwise general key very specific.Adding the digit “4” to a PAGE key defines this key for paging zone four.Adding “225” to a directed pickup key will define this key as pickup for ex-tension 225 only. The key must already be assigned by the installing techni-cian.Use this program to assign extenders to the following keys:KEY DESCRIPTION EXTENDERBOSS ........Boss/Secretary ....................(1–4)DP ..............Direct Pickup ......................(Extension number orstation group number)DS ..............Direct Station ......................(Any extension number)FWRD ........Call Forwarding ..................(0–7)GPIK ..........Group Pick-Up ....................(01–20)IG ..............In/Out of Group ..................(Any group number you are part of)MMPG........Meet Me Page ....................(0–9, ✱)PAGE ........Page ....................................(0–9, ✱)PARK ........Park (orbits)..........................(0–9)RP ..............Ring Plan..............................(1–6), HOLD for noneSPD............Speed Dialing ......................(00–49, 500–999)PMSG ........Programmed Messages ....(01–30 for the iDCS 500)(01–20 for the iDCS 100)DIR ............Directory ..............................PERS (1), SYS (2) or STN (3)VT ..............Voice Mail Transfer ..............Voice Mail Group501–519 for the iDCS 100501–529 for the iDCS 500 M501–549 for the iDCS 500 L/LESG ..............Station Group ......................501–519 for the iDCS 100501–529 for the iDCS 500 M501–549 for the iDCS 500 L/LEPROGRAM KEYSUP & DOWN - Select the extension number.KEYPAD - Used to enter extender codes.HOLD - Used to clear the displayed data.Open customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 107 [201] KEY EXTENDDisplay shows the first station 01:CALL12. Dial the station number (e.g., 205) OR use [205] KEY EXTENDUP or DOWN to scroll through the station 01:CALL1numbers and press the right soft key tomove the cursor3. Enter the key number (e.g., 18) OR use [205] KEY EXTENDUP and DOWN to scroll through the keys 18:DSand use the right soft key to move thecursor OR press the key to be programmed4. Dial the extender according to the listabove and the system will display yourselectionIf there are no more entries, pressthe left soft key to return to step 25. Press TRSF to store and exit programming [205] KEY EXTENDOR press SPK to store and advance to the 18:DS207next program