3635SYSTEM MAINTENANCEALARMSThe iDCS 500 system (with a LAN board installed) and the iDCS 100Enhanced Software version system provide a feature that self-checks forany failures. If a failure does occur in the iDCS software or hardware, a faulterror will be generated and buffered to an alarm report. During an alarmstate every phone with an assigned SYSTEM ALARM button will ring andcause the SYSTEM ALARM button to flash amber. A phone with a displayshould be used so that the alarm information can be viewed. When an alarmoccurs, the user can press the SYSTEM ALARM button to view and scrollthrough the alarms. This will silence the audible part of the alarm, but theSYSTEM ALARM button will continue to flash until your Service Companyviews and clears the alarms in the alarm report located in the system soft-ware.ELBATWOLLANOITACOLERTESREMOTSUCL/S NTB7 21CSB 21DCL 42CSB 42DCL MOA23 SCDi&SCDMOA46 B8SCDi B81SCDiB81SCDiSCDihtiwMOA41B82SCDiB82SCDSCDihtiwMOA41L/S SEY ON ON ON ON ON ON ON ON ON ON ON ONNTB7 ON SEY ON ON ON ON ON ON ON ON ON ON ON21CSB ON ON SEY SEY ON ON ON ON ON ON ON ON ON21DCL ON ON SEY SEY ON ON ON ON ON ON ON ON ON42CSB ON ON ON ON SEY SEY ON ON ON ON ON ON ON42DCL ON ON ON ON SEY SEY ON ON ON ON ON ON ONMOA23 ON ON ON ON ON ON SEY SEY SEY SEY ON SEY ONSCDi&SCDMOA46 ON ON ON ON ON ON ON SEY ON ON ON ON ONB8SCDi ON ON ON ON ON ON ON ON SEY ON ON iON ONB81SCDi ON ON ON ON ON ON ON ON ON SEY ON SEY ONB81SCDiSCDihtiwMOA41ON ON ON ON ON ON ON ON ON ON SEY ON ONB82SCDi ON ON ON ON ON ON ON ON ON SEY ON SEY ONB82SCDiSCDihtiwMOA41ON ON ON ON ON ON ON ON ON ON ON ON SEY
