Samsung iDCS 100 User Instructions

Also see for IDCS 14B STRIP: User guide User guide User guide User guide

Contents

33MEET ME PAGE• Lift the handset.• Press the Meet Me Page (MMPG) key or dial 54.• Dial the desired zone number.• After the attention tone, instruct the paged person to dial 56.• Press WAIT or TRANSFER.• Remain off-hook until the person dials 56 from any phone.• The paged person will be automatically connected with you.CALL PARK AND PAGEWhen you have an outside call for someone who is not at his/her desk, youcan park the call prior to paging. The iDCS 500 offers two different methods:MANUAL PARK ORBITS• While in conversation, press the PARK button.• Entered a desired orbit number (0-9), if the orbit number is busy dialanother orbit number. Display users can press 4 to automatically placethe call in any available orbit number and see the number in the display.• Remember the selected orbit number.• Replace the handset when finished.• Lift the handset and make a page announcement as previouslydescribed (example: “John Smith park two”).To retrieve a parked call from orbit:• Press the PARK button and dial the announced orbit number (0-9).• You will be connected to the parked call.NOTES:1. You must have a PARK button or park access code to retrieve and placecalls in park orbits.2. If the parked call is not retrieved within a pre-programmed period of time,it will recall your keyset and have a slow flashing amber light. You can-not park and page intercom calls.3. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialing.AUTOMATIC PARK WITH PAGE KEY• While in conversation, press the PAGE button. The call is automaticallyparked at your station.• Receive page tone and dial a desired page zone number.• Make announcement indicating your extension number or the line num-ber. Hang up.32PAGING AND MESSAGINGMAKING AN INTERNAL PAGETo make an announcement through the keyset speakers:• Lift the handset.• Press the PAGE key or dial 55.• Dial the desired zone number 0, 1, 2, 3 or 4.• After the attention tone, make your announcement.NOTE: If you have a dedicated page zone key, it is not necessary to pressPAGE and dial a zone number.MAKING AN EXTERNAL PAGETo make an announcement through the external paging speakers:• Lift the handset.• Press the PAGE key or dial 55.• Dial the desired zone number 5, 6, 7 or 8.ORDial 9 to page all external zones.• After the attention tone, make your announcement.NOTE: If you have a dedicated page zone key, it is not necessary to pressPAGE and dial a zone number.ALL PAGETo page all designated keysets and external speakers at the same time:• Lift the handset.• Press the PAGE key or dial 55.• Dial 4 or press the ALL PAGE key.• After the attention tone, make your announcement.NOTE: The LED on the PAGE key will only light when an All Page is inprogress.