iDCS 100 USER INSTRUCTIONSTECHNICAL MANUAL PART 1 JUNE 20021.76 = EXT This option, when set, will forward calls to the externallocation programmed as the forward destination after theExternal Forward timer in MMC 502 expires. In MMC 210there is an option to allow intercom calls to forward aswell.7 = FWD DND This option will forward all calls to the programmeddestination whenever the forwarded station goes intoDND.8 = CFU This option, when set, will forward all calls to theprogrammed destination when the programmeddestination is in another network node. Available withenhanced version software only.9 = CFB This option, when set, will forward calls to theprogrammed destination when the forwarded keyset isbusy, when the programmed destination is in anothernetwork node. Available in enhanced version softwareonly.✱= CFNR This option, when set, will forward calls to theprogrammed destination, when the programmeddestination is in another network node, if the forwardedstation does not answer a call before the forward noanswer timer in MMC 502 expires. Available in enhancedversion software only.ACTION DISPLAY1. Press the transfer key followed by 102Display shows[201] FORWARD0:FORWARD CANCEL2. Dial 0 – ✱ to select forward typeOR[201] FORWARD1:ALL CALL:NONEPress UP or DOWN to select forward typeand press RIGHT soft key to move cursor3. Dial destination number (e.g., 201)OR[201] FORWARD1:ALL CALL:205Press UP or DOWN to select destinationand press RIGHT soft key to move cursor
