Sanyo DS27930, DS32424 Owner's Manual

Also see for DS27930, DS32424: Owner's manual Owner's manual

Contents

Adding or Deleting Channels1. Press MENU key.2. Use the ▲/▼ keys to highlight CH. Scan Memory.3. Press the + key to highlight channel number entry area.4. Enter the channel number you want to add or delete (example): C34. For cable channelsabove 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.5. Press the + key to change the present setting.Example: Added will change to Deleted. Thistakes about three seconds. During that time, theword “Added” or “Deleted” will become yellow.6. Use the 0~9 or ▲▼ keys to choose other channelsto delete or add, or press the MENU key to exit.QuickTips■ Channels deletedfrom scan memorycan be selected withthe number keys.■ Restoring deletedchannels, use theon-screen menu tomanually add chan-nels or start CH.(Channel) Searchfrom the menu.It may take a fewminutes to searchthru the availablechannels, or pressRESET key twice.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-5032Aspect RatioUse this feature when digital equipment is connected to the component input jacks. The 4:3 setting is for normal viewing. The 16:9 setting changes the picture image to wide-screenviewing with minimal portion of top and bottomcompressed.1. Press MENU key.2. Use the ▲/▼ keys to highlight Aspect Ratio.3. Press the – /+ keys to select 4:3 or 16:9.Scan VelocityTV SpeakersAudio OutputMenu LanguagePress MENU key to exitAspect RatioAspect Ratio ➧4:34:3 16:9TV Speakers1. Press MENU key.2. Use the ▲/▼ keys to highlight TV Speakers.3. Press the – /+ keys to turn the speakers ON or OFF.Note: Sound will not be produced through your TV speakers if the OFF mode is selected.Audio OutputMenu LanguagePress MENU key to exitTV SpeakersTV Speakers ➧ONON OFFTV SpeakersAudio OutputMenu LanguagePress MENU key to exitScan VelocityScan Velocity OFF ➧ LowHighHighAspect RatioScan VelocityTV SpeakersAudio OutputMenu LanguageSelect channel usingSelect channel using ▲▼▲▼,, 0~9 keys0~9 keysPress MENU key to exitPress MENU key to exitCH. Scan Memory C 34C 34 DeletedScan VelocityThis unit features an electronic circuit that regulates the scan speed of the electronbeam creating sharp transitions between the light and dark portions of the picture.The result is crisp edges and sharply-defined clarity.1. Press MENU key.2. Use the ▲/▼ keys to highlight Scan Velocity.3. Press the – /+ keys to select Off, Low, or High.Audio OutputThis convenient menu option enables you to select a fixed or variable audio signal.1. Press MENU key.2. Use the ▲/▼ keys to highlight Audio Output.3. Press the – /+ keys to select Fixed or Variable.Fixed Mode (Constant audio output level from TV)Use external equipment’s volume control to adjust sound level.Variable Mode (Output from TV varies with volume)Use the TV and external equipment’s volume controls to adjust the sound level.TV SpeakersMenu LanguagePress MENU key to exitAudio OutputAudio Output Fixed ➧VariableVariable14 Add or Delete Channels / Aspect Ratio / Scan Velocity / TV Speakers / Audio Output