Sanyo DS27930, DS32424 Owner's Manual

Also see for DS27930, DS32424: Owner's manual Owner's manual

Contents

Using the Multimedia Remote ControlRemote Control Keys➀ Mode Keys—Use these keys to program the remotecontrol and to select the operating mode (VCR, TV,CABLE, DVD, SAT, or AUX). To Operate Your...VCR—Press the VCR key;Television—Press the TV key; Cable Box—Pressthe CABLE key; DVD Player—Press the DVD key;and Satellite Receiver—Press the SAT key.Note: Make sure you hold down the mode keywhile entering a code number, see page 9.➁ Input Key—In the TV and Satellite modes, thiskey selects the program source to display on thescreen (TV signal or signal from equipment con-nected to the AV jacks). In the VCR mode, this keyfunctions as a VCR’s TV/VCR key.➂ Number Keys—Two keys must be pressed to selecta channel. Example: Press 0 then 6 to select channel6. For cable channels 100 through 125, press andhold the 1 key until C1–– appears. Then press theother two numbers.➃ Caption Key—See page 17.Operates your TV, VCR, DVD, Cable converter box, and Satellite Receiver. To programthe remote control, see pages 9 ~ 11.Install Batteries as shown (2 AA, not included)Notes:– Do not mix old batteries with new ones or mix different types ofbatteries together.– Remove the batteries if the remote control will not be used fora month or more. Weak batteries may leak and cause damage.(Normal battery life is roughly six months.)IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposedof properly in compliance with all applicable laws. For detailed information,contact your local County Solid Waste Authority.QuickTips■ Be sure batteries areinstalled correctly.■ Point the remotecontrol toward theequipment you wantto operate. Objectsbetween the remotecontrol and the equip-ment may causemisoperation of theremote controlfunction.■ If the remote controldoes not work: PressTV key (see item 1).■ The remote controlmust be programmedbefore it will operateyour VCR, DVDPlayer, SatelliteReceiver, or CableBox. See pages 9~11.■ Cannot select channelwith number keys.Press “0” in frontof numbers 1~9.Example: Channel 05.■ Adjusting the volumelevel: Flashing Rightarrow indicatesvolume is increasingand flashing Leftarrow indicatesvolume is decreasing.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-50322 3147 8095 6INPUTCAPTION SLEEPMENUMUTERECALLPOWER RESETDVD SAT AUXVCR TV CABLEDISPLAYVOL VOLCHCH➀➁➂➃(Continued on page 8.)▲▲Remote Control 7